Work Practices Inspection Criteria
See EH&S work practices criteria for laboratory inspections.
|
Finding Script |
Finding Description |
Risk Level |
Reference |
|---|---|---|---|
|
Are laboratory areas free of food/drink storage and/or evidence of consumption? |
Evidence of food or drink consumption or storage in lab areas was observed. Do not eat, drink or apply cosmetics in lab areas. Food items should never be stored in refrigerators used for chemicals or lab supplies. Storage of drinking water jugs and water coolers/dispensers are not permitted in lab areas and should not be in walkways and paths where hazardous materials are used or stored, to avoid chance of contamination. If food or drink items are in the lab for research purposes, they must be labeled for "Research Use Only." |
Medium |
|
|
Do designated Clean Areas have proper food/drink storage and are they free of lab/prohibited materials? |
Designated Clean Area contained hazardous materials, or potentially contaminated lab items. Keep the designated Clean Area free of PPE and other laboratory materials (lab supplies, lab chemicals, biologicals, radioactive materials, equipment used with hazardous materials, etc.). Food and drink storage and consumption should be limited to snacks, daily lunches, and water bottles. Individually-portioned items are preferred; communal food in open containers is not allowed. Multi-day storage of consumables is discouraged and must be kept contained either in Clean Area drawers, cabinets or plastic type bins. Food prep areas are not permitted whatsoever and this must be done outside of the lab, not in lab designated Clean Areas. |
Medium |
Review Laboratory Clean Areas and remove inappropriate item(s). |
|
Is the Clean Area properly located, posted, and segregated? |
Clean areas in laboratory/clinic/shop areas are required to be posted and segregated from lab items by a physical barrier and/or a minimum of three feet of open bench space where no lab materials or equipment are being used. Clean areas are not permitted in rooms where aerosol transmissible pathogens are manipulated or rooms approved at biosafety level 2+ or higher or when risk assessment does not allow. Consult with ehsrap@ucsd.edu to conduct a hazard assessment and identify an appropriate location. |
Medium |
|
|
Are all lab surfaces, equipment, and materials free of visible contamination? |
Keep the work area clean and free of contamination to prevent injuries and/or exposure. Examples of visible contamination are stained benchtops, sinks, chemical bottles, etc. All laboratory spills and visible contamination need to be cleaned up as soon as possible. |
Medium |
Store all containers in accordance with Chemical Hygiene Plan: General Chemical Safety Guidelines and clean up spilled chemicals according to How to Handle Chemical Spills in Laboratories. |
|
Is the cold/warm room free of mold? |
There was evidence of mold within the environmental (temperature-controlled) room. Mold is a serious indoor air quality health issue and must be decontaminated. Cardboard and paper products significantly and frequently contribute to mold growth and are not allowed in environmental rooms. Work with your lab and all other occupying labs to remove and or decontaminate the supplies, equipment, surfaces, etc., that show any evidence of mold. If the mold reoccurs quickly, contact the Department Safety Officer for assistance scheduling a deeper decontamination of the cold room evaporators and condensing units with a mold-remediation company and coordinate this with Facilities Management. Notify EH&S at ehsrap@ucsd.edu when a decontamination plan has been scheduled. |
Medium |
|
|
Are environmental rooms free of inappropriate materials? |
Flammable liquids, formaldehyde, corrosives, compressed gas cylinders, dry ice or food items must not be stored in environmental rooms. Environmental rooms have limited or no mechanical ventilation, and typically have closed air circulation systems that rely on the opening and closing of the room's door to bring in fresh air. Flammable or dry ice vapors, and undetected compressed gas cylinder leaks, can accumulate and lead to dangerous conditions. Corrosives can corrode cooling coils in the refrigeration system, which may lead to leaks. Limit the storage of cardboard and paper since mold and mildew can easily grow on old or damp cardboard. Use plastic containers or foil to store light sensitive items. Remove prohibited items from environmental room(s). |
Low |
|
|
Have all hazardous processes in the lab been adequately assessed for risk or exposure to personnel? |
A process involving hazards in the lab is in need of an EH&S exposure assessment to determine hazards and controls. Coordinate with ehsrap@ucsd.edu for subject matter expertise and to complete and document assessment. |
Low |
Questions? Contact the EH&S Research Assistance Program.