Phone Model: Panasonic Analog Phone
Last updated
August 6, 2009 1:55:54 PM PDT
The Panasonic Single Line Analog Telephone provides access to many of the Ericsson MD110 features via a standard touch-tone keypad and the Flash button. This model phone can be used as a desk or a wall phone.
Note: The Panasonic Analog Phone has both the pulse and tone dialing modes. The phone should always be set in the tone mode.
|
| Learn to: |
How to use phone features: |
| 1 |
Use Call Hold/ Call Park. |
With party on line:
- Press Flash button.
- Listen for recall dial tone (3 beeps and dial tone).
- Hang up handset.
|
| 2 |
Retrieve a call from the same phone. |
- Lift handset.
- You are connected to the call.
|
| 3 |
Retrieve a call from another phone. |
- Lift handset.
- Dial extension where call was parked. Listen for busy tone.
- Dial 8. You are connected to call.
Note: Call will remain parked for 3 minutes before re-ringing.
|
| 4 |
Use Inquiry/ Consultation Hold. |
With party on line:
- Press Flash button.
- Listen for recall dial tone (three beeps and dial tone).
- Dial second party.
|
| 5 |
Refer back to first party. |
Dial 2. |
| 6 |
Alternate back to second party. |
Dial 2.
Note: If second party is busy or does not answer, press 2 key once, listen for recall dial tone.
Press Flash button again to return to first party.
|
| 7 |
Transfer calls. |
With party on line:
- Press Flash button.
- Listen for recall dial tone (three beeps and dial tone).
- Dial second party.
- Wait for answer, announce call, hang up.
or- After first ring, hang up.
Note: If second party is busy or does not answer, press Flash button once, listen for recall dial tone.
Press Flash button again to return to first party.
|
|
