UCSD Blink: How to Use Call Park

Related Links
Desk Phones
Help With Desk Phones
Desk Phone Features
Departments
	Administrative Computing and Telecommunications

Blink Home > Technology > How to Use Call Park

How to Use Call Park

Summary: Learn how to use call park. This feature, for analog phones only, allows you to place a call on hold so that it can later be retrieved from the same or another phone. Retrieving a parked call from another phone will not work if the analog phone with the incoming call has activated call diversion busy. (You must hear a busy signal to retrieve the call from another phone).

Note: The information on this page is applicable only to analog phone models at UCSD. You may need to check specific information about your phone and the features available to you.

What you should do		How you should do it
1	Activate the call park feature on your analog phone.	With your call on the line, press the R or Lightning Bolt/flash button, or gently depress the hookswitch located under the handset. (The correct method may vary for each analog telephone model.) Listen for recall dial tone (3 beeps and a dial tone) to confirm this analog feature is working. Hang up the handset.
2	You can retrieve the call from another phone.	Go to another phone, pick up the handset, and dial the number of the phone where the call was placed on call park. Listen for a busy signal. Press 8.
3	You can retrieve the call from the same phone.	Lift the handset.