| Signs |
What they mean |
 |
Biohazard
|
- Biohazard signs feature the biohazard symbol (black on orange is common) to indicate the use of infectious agents. These are generally well-contained, and researchers are trained to disinfect work areas after use.
- BSL signs posted at a facility entrance specify the biosafety level (BSL) of precautions observed within. A facility may be BSL 1, 2 or 3, with 3 being the highest level of precautions. BSL 3 labs are rare at UCSD.
- Unauthorized entry into BSL 3 labs is prohibited.
Back to top
|
|
Carcinogen
 |
- Carcinogen signs indicate the use of known human carcinogens. These are generally well-contained. Researchers are trained to carefully identify where carcinogens are being used and to decontaminate work areas after their use.
Back to top
|
|
Hazardous waste
 |
- Hazardous waste signs identify collection areas for hazardous wastes.
- Treat hazardous waste containers with the same caution used for other stored chemicals and hazardous materials.
Back to top
|
|
High voltage
 |
- High voltage signs signal a sustained voltage of more than 600 volts.
- High voltage systems may be accessed only by a qualified electrician.
Back to top
|
|
Laser
 |
- Laser signs indicate the presence of high energy laser equipment.
- Unauthorized entry is prohibited.
- Appropriate eye protection may be required.
Back to top
|
|
Magnetic field
 |
- Magnetic field signs designate facilities housing large research magnets that create a powerful static magnetic field.
- Unauthorized entry is prohibited.
- People with cardiac pacemakers or other implanted medical devices should keep out. Check with your physician if you have questions about working in the vicinity of powerful magnets.
Back to top
|
|
Radiation
|
- Radiation signs indicate that the room contains certain quantities of radioactive material.
- All labs are regularly checked by laboratory staff and Environment, Health & Safety (EH&S) to make sure they are not contaminated.
Back to top
|
|
Clearance tags
A red clearance tag indicates clearance procedures are in progress.
EH&S posts a green clearance tag when a facility or equipment is cleared of known hazards. |
Clearance tags communicate whether a vacated research facility has or has not been cleared for entry. (When a research group vacates a laboratory, EH&S performs a clearance survey to ensure hazards are not left behind.)
- A red clearance tag indicates EH&S has begun clearance procedures in the facility. A red tag means it is safe for custodians to enter and empty regular trash, but not for trades employees to begin work.
- A green clearance tag, posted after hazards are removed, indicates the facility is safe for trades employees to enter and begin work.
- Green clearance tags are also used on decontaminated equipment.
- Report hidden hazards discovered after work begins (such as broken glass, needles, or small amounts of mercury metal in drain traps) to your supervisor or the responsible Department Safety Coordinator (DSC). Do not resume work until the hazard has been corrected.
Back to top
|
