Note: The Panasonic Analog Phone has both the pulse and tone dialing modes.
The phone should always be set in the tone mode.
|
|
Learn to: |
How to use phone features:
|
|
1
|
Use Call Hold/ Call Park.
|
With party on line:
- Press Flash button.
- Listen for recall dial tone (3 beeps and dial tone).
- Hang up handset.
|
|
2 |
Retrieve a call from the same phone.
|
- Lift handset.
- You are connected to the call.
|
|
3 |
Retrieve a call from another phone.
|
- Lift handset.
- Dial extension where call was parked. Listen for busy tone.
- Dial 8. You are connected to call.
Note: Call will remain parked for 3 minutes before re-ringing.
|
|
4
|
Use Inquiry/ Consultation Hold.
|
With party on line:
- Press Flash button.
- Listen for recall dial tone (three beeps and dial tone).
- Dial second party.
|
|
5 |
Refer back to first party. |
Dial 2.
|
|
6 |
Alternate back to second party. |
Dial 2.
Note: If second party is busy or does not answer, press 2 key once, listen for recall dial tone.
Press Flash button again to return to first party.
|
|
7 |
Transfer calls. |
With party on line:
- Press Flash button.
- Listen for recall dial tone (three beeps and dial tone).
- Dial second party.
- Wait for answer, announce call, hang up.
or
- After first ring, hang up.
Note: If second party is busy or does not answer, press Flash button once, listen for recall dial tone.
Press Flash button again to return to first party.
|
|
Questions? Contact the ACT Help Desk, (858) 534-1853.
| 
At Your Service Online
